DRAG-08

Ramping pid controller

DRAG-08 regulator and programmer up to 2 processes that is variable in function of the time "Ramping pid controller". Operation compatible with TC-85 is fully configurable and programmable via the operator panel, with interactive alphanumeric LCD display. Regulation at manual mode or automatic sectable from panel.

Up to 8 automatic cycles are programmable, composed of 14 steps that can be characterized by: wait value at the end of the step, relay output commands (AUX), automatic cycle recovery or replay upon re-entry of the mains power after a blackouts. Up to 2 set of alarm are sectable for every process.

It is equipped with digital inputs for commands, also from outside, of: Start, Hold, Reset of the cycle.

It is specifically designed for the regulation of industrial of klins with gas burner or elelectrical heating for: for: pottery, polymerization, tempering, dryers and also for climatic chamber and, autoclaves.

It can be remotely centralized by P.C and / or PLC thrugh serial interface with Modbus® RTU protocol on pysical layer RS-232 and, optional, RS-485

Log in to download manuals.

Order codes:

Code 802F0020
DRAG-08 "Ramping pid controller" programmer suitable for the regulation and management of an industrial electric or gas oven. Equipped with:

Operator panel in anti-scratch lexan with: 16-character LCD display, 8 LEDs, 5 keys
RS-232 serial interface
1 configurable analogue input: mA, V and PT100.
3 digital inputs from voltage-free contacts for: Start, Hold, Reset
5 relay outputs.
2 digital outputs (024V, 20mA) for SSR or relay command
Operating temperature 0 ÷ 50 ° C, Relative humidity up to 90% non-condensing
Degree of protection from the front IP54
Preparation: for assembly from the front of the panel. dimensions 96 x 96 prof. 110 mm
Supplied: programmable thermocouple / 4-20mA converter, DIN rail mounting


Code 802F0021
DRAG-08 "Ramping pid controller" programmer suitable for the regulation and management of an industrial electric or gas oven. Equipped with:

Operator panel in anti-scratch lexan with: 16-character LCD display, 8 LEDs, 5 keys
RS-232 serial interface + RS-485 interface isolated for supervisor
1 configurable analogue input: mA, V and PT100.
3 digital inputs from voltage-free contacts for: Start, Hold, Reset
5 relay outputs.
2 digital outputs (0÷24V, 20mA) for SSR or relay command
Power supply: 110÷230 Vac, 47 ÷ 63 Hz, 6Va.
Operating temperature 0 ÷ 50 ° C, Relative humidity up to 90% non-condensing
Degree of protection from the front IP54
Preparation: for assembly from the front of the panel. dimensions 96 x 96 prof. 110 mm
Supplied: programmable thermocouple / 4-20mA converter, DIN rail mounting

Code 802F0030
DRAG-08 "Ramping pid controller" programmer for adjusting 2 processes over time. Suitable for: intermittent electric / gas ovens, climatic cell, dryers.
Equipped with:

Operator panel in anti-scratch lexan with: 16-character LCD display, 8 LEDs, 5 keys
RS-232 serial interface
2 configurable analog inputs: mA, V and PT100.
3 digital inputs from voltage-free contacts for: Start, Hold, Reset
5 relay outputs.
2 analogue outputs (4÷20mA) for servocontrol, control valves
Power supply: 110÷230 Vac, 47 ÷ 63 Hz, 6Va.
Operating temperature 0 ÷ 50 ° C, Relative humidity up to 90% non-condensing
Degree of protection from the front IP54
Preparation: for assembly from the front of the panel. dimensions 96 x 96 prof. 110 mm
Supplied: programmable thermocouple / 4-20mA converter, DIN rail mounting

Code 802F0031
DRAG-08 "Ramping pid controller" programmer for adjusting 2 processes over time. Suitable for: intermittent electric / gas ovens, climatic cell, dryers.
Equipped with:

Operator panel in anti-scratch lexan with: 16-character LCD display, 8 LEDs, 5 keys
RS-232 serial interface + RS-485 interface isolated for supervisor
2 configurable analog inputs: mA, V and PT100.
3 digital inputs from voltage-free contacts for: Start, Hold, Reset
5 relay outputs.
2 analogue outputs (4÷20mA) for servocontrol, control valves
Power supply: 110÷230 Vac, 47 ÷ 63 Hz, 6Va.
Operating temperature 0 ÷ 50 ° C, Relative humidity up to 90% non-condensing
Degree of protection from the front IP54
Preparation: for assembly from the front of the panel. dimensions 96 x 96 prof. 110 mm
Supplied: programmable thermocouple / 4-20mA converter, DIN rail mounting.